How to maintain the battery of electric pallet jack?
Nowadays, electric pallet jack is used more and more widely. In the transportation work, enterprises attach importance to the control of work efficiency and cost, and the use of electric pallet jacks can effectively solve these two problems at the same time. Moreover, the electric pallet jack also adapts to the trend of environmental protection. It does not produce pollutants, and has low noise, which is good for people's physical and mental health. However, many people are not familiar with the common sense related to the maintenance of electric pallet jacks, so the electric pallet jack manufacturer first came to popularize the method of maintaining the battery, an important component of electric pallet jacks.
To be sure, people's maintenance work on the battery of electric pallet jack is a short board, which is easy to be ignored or improperly maintained. The electric pallet jack manufacturer tells us that good maintenance will prolong the service life of the equipment. It can be compared that under the condition of paying attention to maintenance or neglecting maintenance, which electric pallet jack of the same model and purchased at the same time will fail? The answer is clear at a glance. The electric pallet jack manufacturer thinks that enterprises should understand that it costs a lot to repair and replace batteries. If it can be avoided, why waste money?
Before charging the battery of the electric pallet jack, check whether the battery temperature is lower than 30 ℃ and whether the electrolyte level is lower than the partition. The electric pallet jack manufacturer suggested that the wires should be checked for normal use. We need to plug the battery charger plug into the socket, and then open the charging device for inspection.
The temperature of the battery of the electric pallet jack shall not exceed 45 ℃ during charging. If the battery temperature exceeds this range, please stop charging and recharge the battery at a lower current after it cools down to ensure safe use of electricity. After 14~16 hours of charging, the electrolyte density of the battery can reach 1.27~1.29kg/1.25 ℃, and the voltage is 2.7V. The electric pallet jack manufacturer suggests that you should charge and maintain the electric pallet jack in time after using it.
After the battery of the electric pallet jack is charged, the charging current of the charger is disconnected, and the "STOP" indicator light is on. At this time, turn off the switch and pull out the charger to avoid accidents and unnecessary losses. This is not a problem if you buy a pallet jack produced by the electric pallet jack manufacturer. The electric pallet jack of the electric pallet jack manufacturer is equipped with a full intelligent fast charger, which does not require personnel supervision. The intelligent electric quantity display instrument monitors the voltage in real time, so as to quickly understand the output voltage and the amount of electricity stored.
评论
发表评论