electric forklift manufacturers custom hand operated forklift using basic steps

 

Hand operated forklift has been widely used in the market. Some large supermarkets, factories, and logistics commonly used handling equipment, electric hydraulic trucks, and manual hydraulic trucks are a good solution. The electric hydraulic truck saves time and effort, and effectively improves labor efficiency. The hand operated forklift is small and flexible, and it is more handy when handling goods. But no matter it is an electric hydraulic pallet truck, attention should be paid to the operation steps. So what are the specific steps?

Electric forklift manufacturers custom-made manual hydraulic trucks are mostly used in the form of matching pallets. When using, the trucks should be inserted from the large side of the pallet, leaving a distance of 20 cm. Then pay attention to the 3 gears on the hand operated forklift handle: up is the lowering function, down is the lifting function, and the center is the neutral gear. When the gear is in neutral, the gear is dialed down, which is the lift function. Then, adjust the pallet jack handlebar up and down to the appropriate height. 

After ascending, set the electric forklift manufacturers custom truck to the neutral position, pull the handle of the truck with both hands, and drag it to the selected location. At this time, the handlebar of the transporter does not have a lift, which will become lighter and less strenuous. Then turn the hand operated forklift gear all the way up until the forklift is lowered to the bottom, then adjust the forklift to neutral, and pull the forklift out with both hands.

The above process is simple and clear, and the operation is simple, so there is no need to repeat it. However, while we are proficient in the daily application of pallet trucks, we also need to pay special attention to electric forklift manufacturers who custom hand operated forklift do not press the pallet after using the pallet, and need lubricating oil to maintain it once a month or so to improve its performance and performance. Ting long service life.

In addition, we also need to understand the precautions for the use of hand operated forklift customized by electric forklift manufacturers. Before use, it is necessary to know the braking position of the equipment, so that it is convenient to stop in time. Do not stop in an emergency during the operation, so as to avoid the loss of goods due to falling. Therefore, we recommend not to stack high goods on the forklift. If the fork is longer than the pallet, it is necessary to hold the middle of the pallet to avoid tilting and collapse during driving, and be more careful when driving.

We said that the truck cannot be overloaded and eccentric, so do not step on the fork with one foot when driving the electric hydraulic truck and hand operated forklift. In addition, if there is a problem, it needs to be repaired in time. We should operate in strict accordance with the operation requirements of electric forklift manufacturers.