electric forklift manufacturers teach everyone about motor maintenance

 

The electric equipment of electric forklift manufacturers is a lot of handling equipment used in warehouses and warehouses today, and the motor is a very important part of the storage equipment such as small electric forklift, so the daily maintenance of the motor has become a very important link. But there are many friends who don't know how to maintain the motor very well. Then, we will spread the knowledge to everyone.

The reason why we maintain the motor is not only to ensure that the equipment does not fail, to ensure the smooth progress of the work, but also to prolong the life of the battery, which is also an indirect cost saving. The battery should be charged in time after use, and it should not be placed for more than 24 hours. Electric forklift manufacturers remind everyone, try not to overcharge the battery of small electric forklift when charging, overcharging the battery will seriously affect the performance and service life of the battery. And after the charging is completed, the battery liquid level should be checked in time, so that distilled water can be added in time to maintain the liquid level. Furthermore, under normal circumstances, dilute sulfuric acid cannot be added.

When charging, electric forklift manufacturers remind everyone to maintain good ventilation and no smoking. The battery fluid hole plug and gas cover should be kept clean, removed or opened when charging, and then installed or closed after charging. The battery surface, connecting wires and screws should be kept dry and clean. If there is sulfuric acid, wipe it off with cotton gauze dipped in lye solution, do not let the lye solution enter the battery, and avoid contact with any liquid and harmful substances, and any metal impurities must not fall into the battery.

Batteries that are infrequently used or that have been left for long periods of time need to be recharged every 3 months. If there are "backward cells" in the small electric forklift battery pack, equalization charging is only performed on the backward cells alone. Here electric forklift manufacturers explain what is a backward battery, which refers to a battery whose voltage value is lower than other batteries or has been repaired due to faults during the charging and discharging process.

The above mentioned equalization charging, so how to operate it? electric forklift manufacturers answer for you. First carry out ordinary charging, stop charging for 1 hour when fully charged, and then use 0.25I5 to charge for 1 hour, repeat several times until the charger is closed and intense bubbles are generated in the battery. When placing the battery, avoid direct sunlight, and the distance from the heat source should not be less than 2M.