electric forklift manufacturerscustom small electric forklift maintenance

 

Electric forklift manufacturers customize small electric forklift maintenance is a very important part. Generally, a small electric forklift needs to be regularly maintained after a week of operation, in order to prolong the service life of the equipment and maintain a high level of work efficiency. When the small electric forklift is repaired, the parts to be replaced should be provided by the original manufacturer as much as possible to ensure the quality.

Next, electric forklift manufacturers customize and popularize the points that need to be paid attention to in maintaining equipment. Only after systematic study can maintenance work be carried out:​

1. Maintain hygiene. One is to keep the maintenance site clean and hygienic, and the other is to inject new clean oil into the hydraulic system. Here electric forklift manufacturers customize to remind everyone to pay attention that if different grades of hydraulic oil are used, it will damage the hydraulic components, so use the same grade of hydraulic oil. Hydraulic oil.

2. Do not carry loose items or valuables on your body during maintenance. When repairing the electrical system of the small electric forklift, the metal contacts the energized electronic components, which may cause short circuit or burning. Therefore, electric forklift manufacturers hereby remind everyone to take off the watch, earrings or other accessories. Before checking the hydraulic system, the fork should be lowered to release the system pressure; before opening the left and right box covers or the electrical system, the key switch of the (full/half) small electric forklift should be turned off.

3. The oil temperature in the transmission or hydraulic system may be high. Electric forklift manufacturers recommend to let the small electric forklift cool down before replacing the gear oil or hydraulic oil to avoid combustion caused by high oil temperature. When checking the oil leakage of the car body, please wipe it with paper or cardboard, and do not touch it directly with your hands to avoid burns. In addition, when working under the small electric forklift, it should be supported by a bracket to ensure safety.

4. Electric forklift manufacturers custom remind everyone to abide by relevant regulations, protect the environment, store and discharge oil according to regulations, and do not discharge it into the sewer. Disconnect the battery power supply when the small electric forklift body is welded to prevent the welding current from entering the battery. Do a good job in motor maintenance, and measure the cold insulation resistance of the motor every three months. If the resistance is less than 0.5 MΩ, dry it immediately. Do a comprehensive maintenance of the motor once a year.