Maintenance of electric forklift charger

 electric forklift

Maintenance of electric forklift charger
1. Please wipe the electric forklift charger with a dry cloth or anti-static cloth to keep it clean
2. The charger must prevent strong impact or exposure to high temperature and humidity
3. It is forbidden to charge non-rechargeable batteries
4. It is forbidden to disassemble the charger without authorization
5. The charger should be placed vertically and placed in a dry and ventilated environment to avoid moisture and keep away from flammable and explosive materials
6. After the electric forklift battery is fully charged, disconnect the input AC power first, and then disconnect the charger from the battery
7. Do not cover the charger when charging, and the ambient temperature should not exceed 40℃
8. Do not use chemical or abrasive cleaning agents, so as not to damage the shell
9. This charger is for indoor use only, beware of rain
10. It is forbidden to charge non-rechargeable batteries
11. The AC power supply must be disconnected when no one is in use or the AC power supply is not used for a long time
12. The interval between two starts is not less than 10 seconds (cut off the input power)

electric forklift


Precautions for the use of electric forklift chargers
1. The battery polarity cannot be reversed, otherwise the smart charger and battery will be damaged. The smart charger should be installed in a special place with good ventilation, dryness, no serious dust, no corrosive gas, and no strong electromagnetic field interference. The cabinet should be grounded reliably (there is a grounding bolt at the bottom of the back of the cabinet).
2. The smart charger is suitable for indoor and outdoor use, and cannot enter the machine without water.
3. The input power of the smart charger is two-phase 380V±5%, 50HZ, and the input line cross-section is not less than 62.
4. The output line should be selected according to the distance, and the total voltage drop of the line should not exceed 5%.
5. The smart charger is suitable for ambient temperature of -10℃～50℃ and altitude below 1000 meters. When the machine is in use, the distance from the surrounding walls that affect its ventilation and heat dissipation should be greater than 0.6 meters. Regularly check whether the fan is operating normally.
6. When charging the electric forklift, plug in the battery plug first, and then turn on the power. After charging is complete, first cut off the power supply and unplug the battery.

评论

发表评论

此博客中的热门博文

How to clean stainless steel pallet truck manufacturer?

图片
The stainless steel pallet jack suppliers in the restaurant has been used for a long time, there are stains on the surface that can't be wiped off and loses its luster and becomes dull. How can the stainless steel pallet truck manufacturer be restored to light? Stainless steel pallet jack suppliers features Stainless steel  pallet truck manufacturer  casters are made of Japanese technology, special nylon material, and matched with bearings, so that stainless steel pallet jack suppliers are silent; Light: stainless steel pallet truck manufacturer are light, and the lighter the weight, greatly reducing your work intensity and improving efficiency; Durable: stainless steel pallet jack suppliers casters are made of high quality natural rubber wheels, and the service life is 8 times that of ordinary trucks; No trace: stainless steel pallet truck manufacturer have high wear resistance and do not harm any floor (anti-static floor, woode...
阅读全文

How to use instruments to detect faults in electric forklift?

图片
Instrument detection method is a method of using instruments and meters to diagnose faults in electric forklift . These instruments and meters are used to measure parameters without dismantling hydraulic equipment and compare them with normal values to determine if there is a malfunction. Generally speaking, using instruments and meters for detection is more accurate and effective. At present, there are certain performance requirements for hydraulic system inspection instruments both domestically and internationally, such as being able to measure liquid flow rate, pressure, temperature, pump or motor speed, etc; Be able to adjust the system pressure quickly and accurately, keeping the system temperature within ± 3 ℃ after initial and final testing to ensure the accuracy of the measured parameters; Lightweight structure, reliable operation, low price, and simple operation, suitable for construction sites, repair shops, and other places. Below, electric forklift manufacturer  will in...
阅读全文

Summary of Electric Forklift Manufacturers on the Problems of Electric Forklift

图片
  1. The requirements of electric forklift manufacturers for the assembly of threaded connections for self loading stacker are: (1) The assembled threads must meet the specified technical requirements. There should be no significant damage to the thread, no bending deformation of the screw, and the fitting quality of the threaded part should be able to be twisted by hand without looseness in a free state; After tightening the thread, the lower plane of its head (or nut) should have good contact with the connected workpiece; (2) After tightening the bolt and nut, the bolt should expose 2-4 threads of the nut, and should not expose too long or too short (this should be noted when replacing the bolt); (3) The components connected by group threads should have uniform contact, good fit, and uniform stress. When tightening for this purpose, it should be done in sequence (such as tightening the nuts of the wheels); (4) The manufacturer of electric forklifts stipulates that locking mea...
阅读全文