What should attention before using the hydraulic pallet truck manufacturer?

The hand pallet truck manufacturers is a loading and unloading and short-distance transportation dual-purpose vehicle. The hydraulic pallet truck manufacturer has the characteristics of lifting balance, flexible rotation and convenient operation. The hand pallet truck manufacturers is an indispensable auxiliary tool for material handling and will be used by general enterprises. What should I check and how to operate it before using the hydraulic pallet truck manufacturer? The following NEW NEWTON will be introduced in detail.
hand pallet truck manufacturers
Pre-use safety check
1. Check the hand pallet truck manufacturers hydraulic cylinder for leak before use.
2. Check if the hydraulic pallet truck manufacturer pulley device is valid before use.
3. Check if the hand pallet truck manufacturers pulley device is entangled and removed before use.
4. If any of the above inspections are not qualified, the use of hydraulic pallet truck manufacturer is prohibited.
hand pallet truck manufacturers
  Steps
1.Suppress
Push the control handle of the hand pallet truck manufacturers to the lower position and press the direction handle to press the hydraulic pallet truck manufacturer. The weight of the forked cargo must not exceed the weight limit of the hand pallet truck manufacturers.
2. Pull goods
After the hydraulic pallet truck manufacturer presses the goods off the ground, the hand pallet truck manufacturers control handle is hit to the middle position, and the goods can be dragged, and the goods cannot be run while pulling the goods, and need to be slowed down.
3. Pressure relief
After pulling the cargo to the destination, the control handle of the hydraulic pallet truck manufacturer is hit to the upper position, and the hand pallet truck manufacturers is depressurized until the cargo touches the ground.
hand pallet truck manufacturers
4. Empty car operation
When the empty car is running, the hydraulic pallet truck manufacturer should be properly raised and raised to avoid contact between the front axle support frame and the ground.

评论

发表评论

此博客中的热门博文

How to clean stainless steel pallet truck manufacturer?

图片
The stainless steel pallet jack suppliers in the restaurant has been used for a long time, there are stains on the surface that can't be wiped off and loses its luster and becomes dull. How can the stainless steel pallet truck manufacturer be restored to light? Stainless steel pallet jack suppliers features Stainless steel  pallet truck manufacturer  casters are made of Japanese technology, special nylon material, and matched with bearings, so that stainless steel pallet jack suppliers are silent; Light: stainless steel pallet truck manufacturer are light, and the lighter the weight, greatly reducing your work intensity and improving efficiency; Durable: stainless steel pallet jack suppliers casters are made of high quality natural rubber wheels, and the service life is 8 times that of ordinary trucks; No trace: stainless steel pallet truck manufacturer have high wear resistance and do not harm any floor (anti-static floor, woode...
阅读全文

How to use instruments to detect faults in electric forklift?

图片
Instrument detection method is a method of using instruments and meters to diagnose faults in electric forklift . These instruments and meters are used to measure parameters without dismantling hydraulic equipment and compare them with normal values to determine if there is a malfunction. Generally speaking, using instruments and meters for detection is more accurate and effective. At present, there are certain performance requirements for hydraulic system inspection instruments both domestically and internationally, such as being able to measure liquid flow rate, pressure, temperature, pump or motor speed, etc; Be able to adjust the system pressure quickly and accurately, keeping the system temperature within ± 3 ℃ after initial and final testing to ensure the accuracy of the measured parameters; Lightweight structure, reliable operation, low price, and simple operation, suitable for construction sites, repair shops, and other places. Below, electric forklift manufacturer  will in...
阅读全文

Summary of Electric Forklift Manufacturers on the Problems of Electric Forklift

图片
  1. The requirements of electric forklift manufacturers for the assembly of threaded connections for self loading stacker are: (1) The assembled threads must meet the specified technical requirements. There should be no significant damage to the thread, no bending deformation of the screw, and the fitting quality of the threaded part should be able to be twisted by hand without looseness in a free state; After tightening the thread, the lower plane of its head (or nut) should have good contact with the connected workpiece; (2) After tightening the bolt and nut, the bolt should expose 2-4 threads of the nut, and should not expose too long or too short (this should be noted when replacing the bolt); (3) The components connected by group threads should have uniform contact, good fit, and uniform stress. When tightening for this purpose, it should be done in sequence (such as tightening the nuts of the wheels); (4) The manufacturer of electric forklifts stipulates that locking mea...
阅读全文