What effect the mini electric stacker use if it not fully charged?

The hydraulic stacker factory battery is the core power of the mini electric stacker. Because the charging and discharging states are the main steps to determine the cycle life of the hydraulic stacker factory during use, many users often ignore the charging block. After using the mini electric stacker, the battery pack is connected to the hydraulic stacker factory charger, and even when it is not fully charged, the mini electric stacker is used, which will accelerate in the long run,the vulcanization speed of the hydraulic stacker factory battery affects the life of the mini electric stacker. Intermittent charging can be said to reduce the number of cycles of the hydraulic stacker factory. When many forklift truck drivers rest at noon, the mini electric stacker still has half of the remaining power, and it is charged and charged for 1 hour. The crystals of the hydraulic stacker factory battery are getting larger and larger, and the storage current will drop. At present, battery users and managers have insufficient understanding of the importance of battery maintenance, insufficient attention, and untimely maintenance. The maintenance of the battery is limited to simple maintenance work such as battery hydration, and there is a lack of understanding of the professional maintenance methods of the battery.
hydraulic stacker factory
The electrolyte concentration of the mini electric stacker battery is too high. During the use of the battery, the temperature will rise and it will be easy to lose water at high temperature. If the water cannot be replenished in time, the electrolyte concentration will be too high, leakage, accelerated vulcanization, affecting the use time of the hydraulic stacker factory battery. In summary, the mini electric stacker lead-acid battery often fails to be scrapped when it is less than 1/3 of the design use time, wasting a lot of money and resources. Insufficient charging in the actual working environment, the hydraulic stacker factory battery is used without full charge, so that the mini electric stacker battery is in an unsaturated state for a long time, accelerate the vulcanization, affecting the hydraulic stacker factory battery life. Charging in the middle in the actual working environment, the battery is often charged when the mini electric stacker is not exhausted. After the battery is not fully charged, the hydraulic stacker factory will continue to be used. The battery of the high car will have a "memory effect", which will not be able to complete the saturation charging, which will affect the usage time of the mini electric stacker.
hydraulic stacker factory
The daily professional maintenance of the hydraulic stacker factory lead-acid battery, the repair and recycling of used batteries have become a hot spot in the industry. The lead sulfate produced by the long-term unsaturated and unbalanced mini electric stacker battery can easily block the small holes in the plate, and the effective substances in the deep layer of the plate do not participate in the chemical reaction. In this way, the internal resistance of the battery increases, and the voltage drops quickly, so that the battery of the hydraulic stacker factory cannot release the entire capacity.

评论

此博客中的热门博文

How to clean stainless steel pallet truck manufacturer?

How to use instruments to detect faults in electric forklift?

Summary of Electric Forklift Manufacturers on the Problems of Electric Forklift