What if the pallet jack forklift pressure does not rise?

Hydraulic hand truck are the most commonly used handling tools in factories, warehouses, and workshops. Because the pallet jack forklift is simple in shape and the hydraulic hand truck is powerful, this simple pallet jack forklift often has one or the other problems, such as the slow rise of the hydraulic hand truck, the slow decline of the pallet jack forklift, or the hydraulic hand truck. Not up.
hydraulic hand truck
When the pallet jack forklift can't get up, many people think that the hydraulic hand truck is broken? In fact, this is not the case. In many cases, there is air in the pallet jack forklift. The hydraulic pressure of the hydraulic hand truck does not rise or rise slowly. At this time, it is only necessary to simply drain the air from the pump of the pallet jack forklift to make the hydraulic hand truck intact.
The method of manually venting the air in a pallet jack forklift is very simple. The following is for you:
Hydraulic hand truck usually have three gear positions
hydraulic hand truck
  1. In the middle of the handle of the pallet jack forklift is the positioning gear. Hydraulic hand truck does not rise or fall.
2. The handle of the pallet jack forklift is up to the neutral position, which is the gear position and pressure relief position of the hydraulic hand truck.
3. The handle of the pallet jack forklift is dialed downwards, that is, the closing of the oil seal can increase the hydraulic pressure of the hydraulic hand truck.
hydraulic hand truck
We only need to move the gear of the pallet jack forklift to the top, and then press the handle as if it is pressed normally. At this time, although the hydraulic hand truck will not rise, it can remove the air in the pump, and the pressure is about 10-20. It will be fine.

评论

发表评论

此博客中的热门博文

How to clean stainless steel pallet truck manufacturer?

图片
The stainless steel pallet jack suppliers in the restaurant has been used for a long time, there are stains on the surface that can't be wiped off and loses its luster and becomes dull. How can the stainless steel pallet truck manufacturer be restored to light? Stainless steel pallet jack suppliers features Stainless steel  pallet truck manufacturer  casters are made of Japanese technology, special nylon material, and matched with bearings, so that stainless steel pallet jack suppliers are silent; Light: stainless steel pallet truck manufacturer are light, and the lighter the weight, greatly reducing your work intensity and improving efficiency; Durable: stainless steel pallet jack suppliers casters are made of high quality natural rubber wheels, and the service life is 8 times that of ordinary trucks; No trace: stainless steel pallet truck manufacturer have high wear resistance and do not harm any floor (anti-static floor, woode...
阅读全文

How to use instruments to detect faults in electric forklift?

图片
Instrument detection method is a method of using instruments and meters to diagnose faults in electric forklift . These instruments and meters are used to measure parameters without dismantling hydraulic equipment and compare them with normal values to determine if there is a malfunction. Generally speaking, using instruments and meters for detection is more accurate and effective. At present, there are certain performance requirements for hydraulic system inspection instruments both domestically and internationally, such as being able to measure liquid flow rate, pressure, temperature, pump or motor speed, etc; Be able to adjust the system pressure quickly and accurately, keeping the system temperature within ± 3 ℃ after initial and final testing to ensure the accuracy of the measured parameters; Lightweight structure, reliable operation, low price, and simple operation, suitable for construction sites, repair shops, and other places. Below, electric forklift manufacturer  will in...
阅读全文

Summary of Electric Forklift Manufacturers on the Problems of Electric Forklift

图片
  1. The requirements of electric forklift manufacturers for the assembly of threaded connections for self loading stacker are: (1) The assembled threads must meet the specified technical requirements. There should be no significant damage to the thread, no bending deformation of the screw, and the fitting quality of the threaded part should be able to be twisted by hand without looseness in a free state; After tightening the thread, the lower plane of its head (or nut) should have good contact with the connected workpiece; (2) After tightening the bolt and nut, the bolt should expose 2-4 threads of the nut, and should not expose too long or too short (this should be noted when replacing the bolt); (3) The components connected by group threads should have uniform contact, good fit, and uniform stress. When tightening for this purpose, it should be done in sequence (such as tightening the nuts of the wheels); (4) The manufacturer of electric forklifts stipulates that locking mea...
阅读全文