How to properly clean pallet truck suppliers?

During the long-term use of electric pallet truck manufacturers, more dust and debris will accumulate, which will have a certain impact on the performance of pallet truck suppliers. It is more important to clean electric pallet truck manufacturers at regular intervals and must not be ignored.

In the daily cleaning of pallet truck suppliers, there are often some misunderstandings, such as direct water washing, if this cleaning electric pallet truck manufacturers, it is ruined pallet truck suppliers.

1. rinse directly with water

In order to save labor and time, the electric pallet truck manufacturers operator uses a bucket of water or water pipes to shower the pallet truck suppliers, even directly with a high-pressure water gun. The electric pallet truck manufacturers is no better than the car's sealing effect. The pallet truck suppliers design is indoor work, and there is no waterproof and waterproof function. Everyone knows that the circuit components are the most afraid of water. When the electric pallet truck manufacturers washes the body with water, the water will flow under the base gap and the pedal gap of the pallet truck suppliers to cause damage to the circuit components. First of all, there will be some "soft faults", that is, the electric pallet truck manufacturers will be good or bad, and it will not break for a while, and it will not be repaired for a while; then the circuit components are damaged, the most serious is the battery or other the circuit is short-circuited, causing smoke and fire during operation, and burning pallet truck suppliers.

2. Do not turn off the power when cleaning the electric pallet truck manufacturers

After parking, change the battery and clean it. When not operating the pallet truck suppliers, turn off the power. Otherwise, it may be accidental to touch the electric pallet truck manufacturers control switch, causing an accident. It is also possible to short-circuit the positive and negative electrodes or other electronic components of the battery when using a wet rag or other metal tool. The battery voltage of the pallet truck suppliers itself exceeds the human body load and there is a risk of electric shock.

So what is the way to properly clean the electric pallet truck manufacturers?

1. The first step is to clean the outside of the pallet truck suppliers. Before cleaning, it is necessary to turn off the various power sources of the electric pallet truck manufacturers to prevent electrical damage caused by short circuit to the pallet truck suppliers during the cleaning process. .

2. The exterior of the electric pallet truck manufacturers can be wiped with a wet rag.

3. When cleaning various electrical and voltage components of pallet truck suppliers, you can use compressed air to blow off the dust on the electric equipment voltage of the electric pallet truck manufacturers. It should be noted that the electrical voltage components cannot be flushed with high pressure water gun. of.

4. After cleaning the pallet truck suppliers, check the parts or parts that need to be lubricated in the electric pallet truck manufacturers according to the lubrication parts, and add the lubricating oil in time.

5. pallet truck suppliers battery can be washed with water, but water can not enter the battery unit.  electric pallet truck manufacturers battery is best to hang it out to avoid water in some parts of the pallet truck suppliers.

6. In order to maintain the flexible operation of the wheels of the electric pallet truck manufacturers, it is necessary to remove the attachments of the vehicle wheels and other parts in time after each transportation is completed, so as to avoid the impact on the operation of the pallet truck suppliers.