How to inspect the working device of electric forklift?

As we all know, the working device of electric forklift is very important, including gantry, chain, pulley, etc. They control the lifting and lowering of goods and affect work efficiency and quality. Once the working device of the electric forklift has problems, it will bring many troubles to the driver's work. Then, how to inspect whether the working device of the electric forklift meets the requirements? Whether it is a cheap forklift or not, we can get twice the result with half the effort by following the instructions of the electric forklift manufacturer.

electric forklift

First, let's see how to inspect the chain and pulley of the electric forklift. As required, the chain piece of the electric forklift shall be free from cracks and deformation, shall be able to rotate flexibly. The elongation of every 20 links shall not exceed 8mm. The wear of the chain pin shall not exceed 5% of the original diameter, and there shall be no serious bending, cracking and corrosion. If the above problems occur, replace them in time. Look at the pulley. If uneven wear occurs on the surface of the pulley, the outer diameter difference between the two pulleys is greater than 0.2mm, and the pulley surface has indentation, which affects the normal operation of the chain. Whether it is a cheap forklift or not, it should be replaced in time.

Then let's take a look at how to inspect the internal and external mast of the electric forklift. According to the regulations, the internal and external portal frames shall be straight, and the straightness error within the full length shall not exceed 1mm, and the maximum shall not exceed 3mm, otherwise they shall be inspected. Use magnetic flaw detection and tapping method to inspect whether there are cracks, deformation and distortion. If the bending deformation exceeds 1.5mm in the full length range, the transverse width exceeds 1.5mm, and the bending deformation of the top plate of the inner mast exceeds 2mm, it shall be corrected. Local deformation or concavity and convex of internal and external portal frames shall be corrected with flame, and the temperature shall be controlled at 700~800 ° C. If the overall deformation and corrosion are serious, whether it is a cheap forklift or not, it will be scrapped.

electric forklift

The above is the inspect method of the working device of the electric forklift. The manufacturer of electric forklifts reminds everyone that whether it is a cheap forklift or not, they should follow the methods provided by the electric forklift manufacturer, carry out regular inspections and maintenance, and solve the problems that may occur in advance, so as to avoid affecting work efficiency and saving costs.

评论

发表评论

此博客中的热门博文

How to clean stainless steel pallet truck manufacturer?

图片
The stainless steel pallet jack suppliers in the restaurant has been used for a long time, there are stains on the surface that can't be wiped off and loses its luster and becomes dull. How can the stainless steel pallet truck manufacturer be restored to light? Stainless steel pallet jack suppliers features Stainless steel  pallet truck manufacturer  casters are made of Japanese technology, special nylon material, and matched with bearings, so that stainless steel pallet jack suppliers are silent; Light: stainless steel pallet truck manufacturer are light, and the lighter the weight, greatly reducing your work intensity and improving efficiency; Durable: stainless steel pallet jack suppliers casters are made of high quality natural rubber wheels, and the service life is 8 times that of ordinary trucks; No trace: stainless steel pallet truck manufacturer have high wear resistance and do not harm any floor (anti-static floor, woode...
阅读全文

How to use instruments to detect faults in electric forklift?

图片
Instrument detection method is a method of using instruments and meters to diagnose faults in electric forklift . These instruments and meters are used to measure parameters without dismantling hydraulic equipment and compare them with normal values to determine if there is a malfunction. Generally speaking, using instruments and meters for detection is more accurate and effective. At present, there are certain performance requirements for hydraulic system inspection instruments both domestically and internationally, such as being able to measure liquid flow rate, pressure, temperature, pump or motor speed, etc; Be able to adjust the system pressure quickly and accurately, keeping the system temperature within ± 3 ℃ after initial and final testing to ensure the accuracy of the measured parameters; Lightweight structure, reliable operation, low price, and simple operation, suitable for construction sites, repair shops, and other places. Below, electric forklift manufacturer  will in...
阅读全文

Summary of Electric Forklift Manufacturers on the Problems of Electric Forklift

图片
  1. The requirements of electric forklift manufacturers for the assembly of threaded connections for self loading stacker are: (1) The assembled threads must meet the specified technical requirements. There should be no significant damage to the thread, no bending deformation of the screw, and the fitting quality of the threaded part should be able to be twisted by hand without looseness in a free state; After tightening the thread, the lower plane of its head (or nut) should have good contact with the connected workpiece; (2) After tightening the bolt and nut, the bolt should expose 2-4 threads of the nut, and should not expose too long or too short (this should be noted when replacing the bolt); (3) The components connected by group threads should have uniform contact, good fit, and uniform stress. When tightening for this purpose, it should be done in sequence (such as tightening the nuts of the wheels); (4) The manufacturer of electric forklifts stipulates that locking mea...
阅读全文