How to operate the automatic pallet stacker correctly?

An motorized pallet stacker is a variety of handling vehicles that can handle the loading, unloading, stacking and short-distance transportation of pallet goods, also known as small electric forklifts. Automatic pallet stacker, three-way motorized pallet stacker and semi-electric stacker. How to operate the automatic pallet stacker correctly? Now NEW NEWTON will give a brief introduction.

1. Motorized pallet stacker start

Make sure the battery is fully charged and the light is on. Insert the key into the electronic lock and turn it clockwise, and lift the emergency stop switch to open the automatic pallet stacker.

2. Motorized pallet stacker forward/backward

Move the automatic pallet stacker control handle toward you and move it down at an appropriate angle. (Do not leave the vertical position and not push to the lowest position), then use the thumb to turn the two rotary switches. When the switch is turned forward, the motorized pallet stacker will forward, and when the switch turns back, the automatic pallet stacker will backward.

The forward/backward speed is controlled by the rotation angle of the push button switch, but when it is started or the surrounding space is narrow, it is necessary to reduce the rotation angle and reduce the traveling speed to ensure safety. The handle has a slow button that can be limited to low speed when pressed.

3, the driving of motorized pallet stacker

Before operating the automatic pallet stacker, check the operating conditions of the brakes and pumping stations and ensure that the motorized pallet stacker battery is fully charged. Hold the joystick with both hands and slowly move the automatic pallet stacker toward the working cargo. If you want to stop, you can use the brake or foot brake to stop the motorized pallet stacker.

4, fork lift of automatic pallet stacker

Press the lever button to raise the button with your finger, then the fork will rise. Press the down button to lower the fork, and release it to stop lifting.

5, parking of motorized pallet stacker

If you need to stop the track smoothly, release your thumb and the rotary switch will automatically reset, the controller will generate a reverse current and the automatic pallet stacker will move smoothly and then stop smoothly.

6, charge the vehicle

When the meter emits a flashing signal, it must be charged on time. When charging, first turn off the electronic lock and then remove the key from the electronic lock.