How to deal with common faults and treatment methods of pallet stacker truck?

Electric lift stacker equipment will inevitably fail after long-term use. Of course, pallet stacker truck are no exception. So what are the common faults that occur during the use of electric lift stacker ? How to eliminate these shortcomings? Let me give you a brief introduction now.
1. Pallet stacker truck electric system does not work
Fault reason: Poor power cable connection or battery connector failure of electric lift stacker.
Solution: Check and correct power wiring or replace battery connector
electric lift stacker
2. Pallet stacker truck does not work
Fault reason: a. The power supply line of the electric lift stacker is poorly connected.
                      b. Burn the pallet stacker truck insurance line. 
                      c. Electric lift stacker electrical equipment motor contactor fault. 
                      d. Pallet stacker truck motor failure.
Treatment:    a. Check and correct power cord
                     b. Replace insurance line 
                     c. Replace motor contactor
                     d. Check and repair the motor
3. Electric lift stacker power indicator does not work
Fault reason: a. The power supply line of the pallet stacker truck is poorly connected.
                      b. The electric lift stacker insurance line was burned.
                      c. The pallet stacker truck key switch is damaged.
                      d. The power indicator of the electric lift stacker is damaged.
Treatment:     a. Check and correct the power cord wiring
                      b. Replace insurance line 
                      c. Replace the key switch
                      d. Replace the power indicator of the pallet stacker truck.
electric lift stacker
4. The electric lift stacker is too noisy
Fault reason: a. The gear or bearing of the electric vehicle of the pallet stacker truck is broken or the gear involute pin groove                                    wears.
                      b.The amount of oil in the electric lift stacker is insufficient or greasy.
Treatment:    a. Replace gear or bearing
                     b. Add or replace gear oil
5. Pallet stacker truck clearance is too large
Fault reason: The accumulated clearance of the electric lift stacker is too large (including clearance)
Treatment: adjustment or replacement
electric lift stacker
6. Pallet stacker truck oil leakage
Fault reason: oil seal or gasket damage of electric lift stacker
Treatment: Replace the oil seal or gasket
These are common faults and treatments in the use of pallet stacker truck.

评论

发表评论

此博客中的热门博文

How to clean stainless steel pallet truck manufacturer?

图片
The stainless steel pallet jack suppliers in the restaurant has been used for a long time, there are stains on the surface that can't be wiped off and loses its luster and becomes dull. How can the stainless steel pallet truck manufacturer be restored to light? Stainless steel pallet jack suppliers features Stainless steel  pallet truck manufacturer  casters are made of Japanese technology, special nylon material, and matched with bearings, so that stainless steel pallet jack suppliers are silent; Light: stainless steel pallet truck manufacturer are light, and the lighter the weight, greatly reducing your work intensity and improving efficiency; Durable: stainless steel pallet jack suppliers casters are made of high quality natural rubber wheels, and the service life is 8 times that of ordinary trucks; No trace: stainless steel pallet truck manufacturer have high wear resistance and do not harm any floor (anti-static floor, woode...
阅读全文

How to use instruments to detect faults in electric forklift?

图片
Instrument detection method is a method of using instruments and meters to diagnose faults in electric forklift . These instruments and meters are used to measure parameters without dismantling hydraulic equipment and compare them with normal values to determine if there is a malfunction. Generally speaking, using instruments and meters for detection is more accurate and effective. At present, there are certain performance requirements for hydraulic system inspection instruments both domestically and internationally, such as being able to measure liquid flow rate, pressure, temperature, pump or motor speed, etc; Be able to adjust the system pressure quickly and accurately, keeping the system temperature within ± 3 ℃ after initial and final testing to ensure the accuracy of the measured parameters; Lightweight structure, reliable operation, low price, and simple operation, suitable for construction sites, repair shops, and other places. Below, electric forklift manufacturer  will in...
阅读全文

Summary of Electric Forklift Manufacturers on the Problems of Electric Forklift

图片
  1. The requirements of electric forklift manufacturers for the assembly of threaded connections for self loading stacker are: (1) The assembled threads must meet the specified technical requirements. There should be no significant damage to the thread, no bending deformation of the screw, and the fitting quality of the threaded part should be able to be twisted by hand without looseness in a free state; After tightening the thread, the lower plane of its head (or nut) should have good contact with the connected workpiece; (2) After tightening the bolt and nut, the bolt should expose 2-4 threads of the nut, and should not expose too long or too short (this should be noted when replacing the bolt); (3) The components connected by group threads should have uniform contact, good fit, and uniform stress. When tightening for this purpose, it should be done in sequence (such as tightening the nuts of the wheels); (4) The manufacturer of electric forklifts stipulates that locking mea...
阅读全文