How to use electric powered forklift correctly in summer?

The summer is hard to bear, and the engineering people are riding the hot pot on the top of the sun. Although the sun is hot, it can't stop the pace of our staff's work. For the high temperature season, we must ensure that the warehouse forklift has low loss and the operator must be the mental state of working at high temperatures to speed up work and shorten work time. So how to properly use the electric powered forklift in the summer to reduce the loss of the warehouse forklift as much as possible?
1. Before entering the summer heat prevention period, make preparations in advance. If necessary, release the electric lubricating oil of the warehouse forklift engine, the drive axle, the gearbox, the steering gear, etc., and then add the summer lubricating oil to the electric powered forklift according to the regulations.
warehouse forklift
2. Remove the scale of the cooling system inside the warehouse forklift in time, and check the heat sink of the electric powered forklift radiator.
3. Pay attention to avoid overheating the engine of the warehouse forklift during operation, and pay attention to the indication reading of the coolant temperature gauge in the electric powered forklift.
4. Always check the temperature and air pressure of the warehouse forklift tires. If necessary, stop at the cool place. After the tire temperature of the electric powered forklift is lowered, continue the operation. Do not use the method of deflation or cold water to reduce the temperature and reduce the electric pressure，that is easy to reduce the warehouse forklift tire life.
5. Adjust the electrolyte density of the electric powered forklift battery, and clear the vent hole on the battery cover, and add distilled water to the warehouse forklift battery according to the situation.
6. Avoid using high-frequency electric powered forklift at high frequency. It is recommended to use the warehouse forklift after 4-6 hours of continuous use, and use them in the ventilated place for about 45 minutes.
7. When it is raining in summer, try not to run the electric powered forklift in the open air in rainy days. Do not let the warehouse forklift run in water.
warehouse forklift
8. Before the operation of electric powered forklift, ensure that the driver is full of energy. If the driver feels tired, dizzy and unresponsive during the operation of warehouse forklift, stop immediately, or use cold water to rub his face to energize to ensure electric powered forklift work safely.
9. Finally, remind you of the most important point: take measures to prevent heatstroke and heat in advance to avoid heatstroke.

评论

发表评论

此博客中的热门博文

How to clean stainless steel pallet truck manufacturer?

图片
The stainless steel pallet jack suppliers in the restaurant has been used for a long time, there are stains on the surface that can't be wiped off and loses its luster and becomes dull. How can the stainless steel pallet truck manufacturer be restored to light? Stainless steel pallet jack suppliers features Stainless steel  pallet truck manufacturer  casters are made of Japanese technology, special nylon material, and matched with bearings, so that stainless steel pallet jack suppliers are silent; Light: stainless steel pallet truck manufacturer are light, and the lighter the weight, greatly reducing your work intensity and improving efficiency; Durable: stainless steel pallet jack suppliers casters are made of high quality natural rubber wheels, and the service life is 8 times that of ordinary trucks; No trace: stainless steel pallet truck manufacturer have high wear resistance and do not harm any floor (anti-static floor, woode...
阅读全文

How to use instruments to detect faults in electric forklift?

图片
Instrument detection method is a method of using instruments and meters to diagnose faults in electric forklift . These instruments and meters are used to measure parameters without dismantling hydraulic equipment and compare them with normal values to determine if there is a malfunction. Generally speaking, using instruments and meters for detection is more accurate and effective. At present, there are certain performance requirements for hydraulic system inspection instruments both domestically and internationally, such as being able to measure liquid flow rate, pressure, temperature, pump or motor speed, etc; Be able to adjust the system pressure quickly and accurately, keeping the system temperature within ± 3 ℃ after initial and final testing to ensure the accuracy of the measured parameters; Lightweight structure, reliable operation, low price, and simple operation, suitable for construction sites, repair shops, and other places. Below, electric forklift manufacturer  will in...
阅读全文

Summary of Electric Forklift Manufacturers on the Problems of Electric Forklift

图片
  1. The requirements of electric forklift manufacturers for the assembly of threaded connections for self loading stacker are: (1) The assembled threads must meet the specified technical requirements. There should be no significant damage to the thread, no bending deformation of the screw, and the fitting quality of the threaded part should be able to be twisted by hand without looseness in a free state; After tightening the thread, the lower plane of its head (or nut) should have good contact with the connected workpiece; (2) After tightening the bolt and nut, the bolt should expose 2-4 threads of the nut, and should not expose too long or too short (this should be noted when replacing the bolt); (3) The components connected by group threads should have uniform contact, good fit, and uniform stress. When tightening for this purpose, it should be done in sequence (such as tightening the nuts of the wheels); (4) The manufacturer of electric forklifts stipulates that locking mea...
阅读全文