How to maintain the four components of a 3 ton electric forklift?

There are four components on the 3 ton electric forklift, which are circuit system composed of metal wires, electrical and electronic components; The transmission system responsible for transmitting the power generated by the engine to the driving wheels of the vehicle to generate the driving force; The chain system which used for driving and traction of electric forklift; The hydraulic system that can change the pressure and increase the force. We all know that no matter how much the electric forklift costs, it needs regular maintenance, and the maintenance of these four parts of the electric forklift is the most important. The electric forklift manufacturer has some suggestions on how to maintain the four components of the 3 ton electric forklift.

First, let's talk about the circuit system of the 3 ton electric forklift. To maintain the circuit system, check whether each control component is sensitive; Whether the circuit contact points are worn; Whether the lighting equipment can be used normally, if not, replace the bulb and fuse; Check whether there is water shortage and liquid leakage in the battery, clean the dirt on the battery surface in time, and tighten the battery wiring port; Whether the electric forklift can lift and drive normally; Whether the insulation and connecting parts are damaged or fall off. The electric forklift manufacturer reminds that it is necessary to regularly remove dust for the circuit.

For the transmission system of the 3 ton electric forklift, check whether the tire screws are loose and fall off; Whether the tire is damaged or embedded with foreign matters; Check and adjust the brake system and movable interface; Clean the rotating bearing and add lubricating oil; Check the gearbox and replace the gear oil if necessary. The electric forklift manufacturer reminds that the transmission system has a great impact on driving safety and driving comfort, and must pay more attention during maintenance.

When maintaining the chain system of 3 ton electric forklift, check whether the lifting chain is broken and damaged, regularly clean the lifting chain and chain shaft, and timely add lubricating oil. The chain and bearing of the traveling crane shall be cleaned regularly and lubricating oil shall be added in time. Finally, the hydraulic system of the 3 ton electric forklift. Clean the hydraulic oil valve as required; Check whether there is oil leakage in the hydraulic pump, oil pipe, joint and oil seal. If there is, replace it in time. The electric forklift manufacturer recommends that the hydraulic oil tank and filter should be cleaned regularly and the hydraulic oil should be replaced in time.

The circuit system, transmission system, hydraulic system and chain system are important components of the 3 ton electric forklift. They must be inspected and maintained regularly, and cannot be neglected. The electric forklift manufacturer believes that this is not only conducive to extending the life of the electric forklift and reducing the use cost, but also can ensure the safe and comfortable operation of the driver and avoid many problems.