Different faults of forklift 2 ton are handled differently

 

Electric forklift manufacturers will always encounter various failure problems and maintenance problems in the process of use. The more common problems include poor lift performance, engine overheating, thermostat failure, equipment not starting and starter failure. The warehouse forklift manufacturer company reminds you that you need to learn the basic operating knowledge of forklift 2 ton to check the fault. Next, let's analyze the failure problem part by part.

1. Poor performance improvement

If the equipment has poor lifting performance and poor performance, there may be a problem with the hydraulic pressure, usually leaks, cracks or damaged hoses. Electric forklift manufacturers recommend that you wipe the hoses and lines with a clean cloth. If there is a leak, there will be hydraulic oil residue in the cloth or line. forklift 2 ton this is probably a broken hose and needs to be replaced; if there is no residue on the cloth, check along the rod for more than a thin layer of oil. If a large amount of oil is found, it is likely that the seal is leaking and needs to be replaced immediately.

2. Engine overheating

There are many reasons for the overheating of the electric forklift engine, the more common one is the blockage of the radiator. Over time, dirt and debris can clog the radiator ports and cause the engine to overheat. When troubleshooting, electric forklift manufacturers recommend looking at the radiator ports for any buildup of mud or dirt, and if so, gently clean the debris with fresh water. After the forklift 2 ton has been cleaned, start the engine to see if there is any improvement. If overheating still occurs, there may be corrosion in the radiator, replace the radiator if necessary.

3. Thermostat failure

The forklift 2 ton thermostat is the part used to keep the engine from overheating. When a trigger temperature is detected, electric forklift manufacturers remind you to turn it on, inject coolant into the engine, and check that the thermostat is working properly. If not, it is recommended to replace.

4. The device cannot be started

When this happens, the first thing to do is to check the battery. Make sure the battery is properly connected in the device and that the battery case or terminals are not corroded. If normal, test the battery functional capacity. If the working efficiency of the battery is lower than 80% as it should be, please replace the battery. If the problem, the battery overheats when you charge the forklift 2 ton battery, it may be working with low electrolyte levels, electric forklift manufacturers recommend adding water.