electric forklift manufacturerselectric pallet stacker when to replace the forks

 

Electric pallet stacker forks are a very important part of handling equipment, and although everyone knows this, it is often overlooked. electric forklift manufacturers believe that replacing the forks at the right time can enhance the safety of the equipment. But when do the forks need to be replaced? There are some obvious signs that it's time to change, but if these signs are obvious, it's time to act. So today we will talk about when we need a device to replace the fork.

When the thickness of the fork is reduced by more than 10%, electric forklift manufacturers remind everyone that the equipment fork needs to be replaced. Because when the thickness of the electric pallet stacker fork is reduced to more than 10%, the use of the fork outside the plateau may make the equipment unable to lift the weight of the goods that it can bear and cause an accident. It’s worth noting that this is especially dangerous in heavy lifting or rough terrain, so it’s imperative to monitor the thickness of the fork and take immediate action to replace it with a new fork if wear reaches the aforementioned point.

When the forks are no longer straight or aligned at the correct angle, electric forklift manufacturers custom remind everyone that it is time to replace the equipment electric pallet stacker forks. It is important to check the fork angle where the fork of the forklift meets the handle of the knife. If the angle exceeds the original angle by 3°, the fork cannot be used further. We can't ignore the problem just because the change in angle is very small, but small angles can also cause big problems. Therefore, we recommend that a dedicated evaluation of the fork be made annually. In fact, there is a better way to reduce this risk, is to check this as a regular item monthly or quarterly.

When cracks or cracks appear, electric forklift manufacturers remind everyone that it is time to replace the equipment fork. The broken or cracked fork of the electric pallet stacker is a very obvious sign that reminds us that we need Genhua forks. It is a wise choice to deal with it as soon as possible. Even if there is a problem with one fork, two forks should be replaced. This is the same principle as replacing tires. It is mainly to balance the use and life of the forks. Usually one fork bears more daily wear and tear than the other fork. If the fork cannot be fully utilized from the performance level, The risk will increase significantly.