How to spend the running-in period of electric forklift price

 

The price of the newly bought electric forklift may not be very smooth, many functions may be a little unskilled in operation, and it takes a period of man-machine running-in. Electric forklift manufacturers china sales want to tell everyone that the new car should not carry heavy goods in the early stage of running-in. Next, let's talk to you about what to do in the first 100 hours of the initial stage of the new car's running-in, and how to maintain the new forklift.

First, carefully check whether there are any problems with the electric forklift price equipment. If any problems are found, carry out pre-inspection and maintenance in time as required. The oil change and lubrication should be earlier than the prescribed time. If the condition is normal, the forklift must be warmed up before driving, no matter what the season. Electric forklift manufacturers china reminds you to avoid emergency braking and emergency steering during driving. It is recommended that you start slowly when selling 1 ton electric forklifts. Do not run the engine at high speed under no-load conditions.

Electric forklift price safe driving, the responsibility is greater than the sky! In order to reduce the occurrence of more safety accidents of electric forklifts, the sales of 1 ton electric forklifts hope that the majority of electric forklift drivers should remember not to drive the forklift under the following conditions:

People have not yet sat down firmly and will not start;

Resolutely do not start the safety equipment in poor condition;

The car door is not closed and will not start;

If the seat belt is not fastened, do not start firmly;

Electric forklift manufacturers china stipulates that the goods shall not be started unless the goods are loaded;

The pedals or fork stations are not resolutely not started;

People at the frame station do not resolutely do not start;

The equipment is over-long, over-high, and over-loaded and will not start;

Resolutely do not start the succession without inspection.

If the electric forklift price is not used for a long time, the sales suggestion of 1 ton electric forklift is to lubricate the bearings once within two weeks of starting use. When adding lubricating oil, pay attention to using new oil to squeeze out all the old oil and lubricate it more than twice. Remember to clean the dirt on the oil cap, oil plug and nozzle before lubricating the bearing to prevent dirt from falling into the forklift structure.

One more point, electric forklift manufacturers china believes that it needs to be reminded. When injecting lubricant with a grease gun, inject it into the joints of each component until the lubricant is squeezed out. Replace seasonal lubricants or engine oils in summer or winter, and the performance of all parts of the electric forklift after lubrication can be optimized, thereby improving work efficiency!