forklift manufacturers in china: what to pay attention to when charging

 

Can a small electric forklift be charged for a long time? I believe this is a question of many users. What forklift manufacturers in china want to tell everyone is that small electric forklift chargers should choose smart chargers. When the battery is fully charged, the charger will automatically power off, so there will be no long-term charging problems, and no explosion problems. . In the use of the battery, we recommend using a special brand charger for charging, and no flammable and explosive materials should be placed around it, so that there will be no problems even if it is charged at night.

Let’s take a look at the steps of charging by forklift manufacturers in china:

1. After parking to the charging area, turn off the red emergency stop switch and key switch, and open the battery box cover;

2. When charging, make sure that the heat dissipation of the device is unobstructed, and then check whether the electrolyte is in normal condition. If the red buoy is 1cm away from the white part, it is normal. If it is not enough, add distilled water in time.

3. Unplug the connector that connects to the battery and the connector that connects to the motor.

4. Connect the battery connector to the charger connector.

Small electric forklift batteries are mostly lead-acid batteries, which require about 8 hours to fully charge, and can be operated at full load for about 4-5 hours after being fully charged. Forklift manufacturers in China remind everyone that each battery discharge cannot exceed 80% of the battery's rated capacity, and the battery must be charged immediately after the discharge is completed. Remember to check the electrolyte level and adjust the specific gravity with deionized or distilled water in time.

If you want to extend the life of the battery, maintenance is essential. Check once a week whether the battery connection wires and lead wires are loose or damaged. If problems occur, adjust and replace them in time. Check the battery voltage, electrolyte density, liquid level and temperature at least once a week. If you find any accumulated water in the battery box, it must be soaked up immediately. Before the end of charging, we need to record the voltage, electrolyte density and temperature of all single cells. If it is found that the measurement data is different, forklift manufacturers in china suggest to ask professionals to deal with it in time.