What is the cause of the steering failure of the small electric forklift?

 

Sometimes when we use electric forklifts, we will have heavy steering problems. Perhaps this is the most troublesome problem among many problems, because it is related to the safety of goods, vehicles, drivers, and pedestrians. It should not be underestimated. watch for.
What is the cause of the steering failure of the small electric forklift? Let’s summarize with the warehouse forklift manufacturers:
1. First check the most visible point to see if the tire pressure of the electric forklift is sufficient, and if the pressure of the four tires is balanced. If the air pressure is insufficient, especially when the air pressure difference between the two sides is large, the deviation of the car will be very serious.
2. Check whether the steering control rod is bent or deformed? There are tie rods and steering axles in the steering system. These components are directly related to the ease of steering.

3. Are the links between the joints too tight, or are they damaged? The tie rods, straight tie rods, steering screw bearings, etc. need to be checked. If it is not too tight or damaged, it is necessary to see if it needs to be lubricated. If the lubrication of the steering device is not in place, the friction between the various parts will increase and the resistance will increase, which are all unfavorable factors that affect the steering.
4. If the gap between the rack and the tooth fan of the forklift is adjusted too tightly, then the rocker arm of the steering gear should be removed during the diagnosis and troubleshooting. At this time, if the steering wheel feels heavy, adjust the rack and the tooth fan. The progress of the screw bearing, if the tightness is uncertain, or there is a feeling of jamming inside, check the screw steel ball, pipe clamp, rack, and bearing for damage. If there is damage, replace it in time.
After inspecting the above components and maintaining them properly, whether it is a large electric storage forklift or a small electric forklift, it should be able to operate normally.