Driving and driving of electric pallet truck

 electric pallet trucks

As a manufacturer of electric pallet trucks, we have received many questions from customers. The most basic question when consulting electric pallet trucks should be about the operation of electric pallet trucks. Below we will explain in detail the driving operation and steps of the electric hydraulic pallet truck.
1. The start of the electric pallet truck:
 Check whether the emergency cut-off switch of the electric pallet truck is turned off. First, turn on the emergency cut-off switch of the electric pallet truck.
Turn on the key switch of the electric pallet truck to see if the power display has enough power.
2. The movement of the electric pallet truck:
After starting the electric pallet truck normally, press down the handle of the electric pallet truck to between 90° and 180°.
 When the handle is pressed down, the thumbs of both hands rotate the travel button forward, and the electric pallet truck moves forward. Turn the travel button one after another, and the electric pallet truck will move backwards.
3. The steering problem of the electric pallet truck:
 When turning the electric pallet truck, pay attention to whether the operation is smooth and there is no abnormal noise. Do you need lubricating oil?
When the operation is smooth, turn the handle of the electric pallet truck left and right to change the direction.

electric pallet trucks


Fourth, the loading and unloading of electric pallet trucks:
1. The fork of the electric pallet truck is lowered to approach the goods.
2. Adjust the height of the forks of the electric hydraulic pallet truck so that the forks are as far as possible into the pallet.
3. The electric hydraulic pallet truck lifts the cargo a few centimeters and confirms whether the cargo is firm.
4. The electric hydraulic pallet truck leaves slowly.
6. After the electric pallet is moved close to the fixed place of the goods, slowly lower the fork to ensure the stability of the goods. After lowering the fork to the lowest position, exit the electric pallet.
7. After you stop using the electric pallet truck, turn off the key switch and remove the key.

评论

发表评论

此博客中的热门博文

How to clean stainless steel pallet truck manufacturer?

图片
The stainless steel pallet jack suppliers in the restaurant has been used for a long time, there are stains on the surface that can't be wiped off and loses its luster and becomes dull. How can the stainless steel pallet truck manufacturer be restored to light? Stainless steel pallet jack suppliers features Stainless steel  pallet truck manufacturer  casters are made of Japanese technology, special nylon material, and matched with bearings, so that stainless steel pallet jack suppliers are silent; Light: stainless steel pallet truck manufacturer are light, and the lighter the weight, greatly reducing your work intensity and improving efficiency; Durable: stainless steel pallet jack suppliers casters are made of high quality natural rubber wheels, and the service life is 8 times that of ordinary trucks; No trace: stainless steel pallet truck manufacturer have high wear resistance and do not harm any floor (anti-static floor, woode...
阅读全文

Summary of Electric Forklift Manufacturers on the Problems of Electric Forklift

图片
  1. The requirements of electric forklift manufacturers for the assembly of threaded connections for self loading stacker are: (1) The assembled threads must meet the specified technical requirements. There should be no significant damage to the thread, no bending deformation of the screw, and the fitting quality of the threaded part should be able to be twisted by hand without looseness in a free state; After tightening the thread, the lower plane of its head (or nut) should have good contact with the connected workpiece; (2) After tightening the bolt and nut, the bolt should expose 2-4 threads of the nut, and should not expose too long or too short (this should be noted when replacing the bolt); (3) The components connected by group threads should have uniform contact, good fit, and uniform stress. When tightening for this purpose, it should be done in sequence (such as tightening the nuts of the wheels); (4) The manufacturer of electric forklifts stipulates that locking mea...
阅读全文

Electric forklift manufacturer: learning to share is the winner in the workplace

图片
When you first enter the workplace, everyone is a node. Over time, you will connect with others, just like a line connecting you. The more people you know, the richer your contacts will be, and the more lines you will be connected with. Over time, you will form your own network of relationships and have more and more influence in the workplace. So, how to establish effective contact with others? Electric forklift manufacturer  believes that only those who know how to share  will gain more contacts and become winners in the workplace. There is an old saying that "Better to Enjoy with Everyone rather than alone". Sharing  is actually very simple, that is, giving what you have to others. It seems to be a loss, but it is actually a gain. It is a two-way communication, mutual giving, and a win-win situation. Business tycoon Li Ka Shing taught his son: "if you cooperate with others, it is reasonable for you to get eight points, then our Li family gets six points." Alt...
阅读全文