How high can cheap forklifts go?

                  

Cheap forklifts are generally used in construction sites or factories. In these two places, the possibility of working at high places cannot be avoided. Therefore, it is difficult for laborers to work at high places, and it will cost a lot to go up. Strength and equipment, if our cheap forklifts don’t have to work hard in the first place, this is more cost-effective, then some people say that the cheap forklifts they are watching are not high nor high, so let our electric forklift manufacturers give them We introduce how high our cheap forklifts can reach.

The larger adjustment height of cheap forklifts refers to the safe distance between the upper surface of the level section of the forklift and the road when the cheap forklifts are fully loaded and the goods are raised to the maximum position. According to electric forklift manufacturers, the standard gantry is a gantry with two sections with a maximum lifting height of 3 meters. This height basically meets the requirements of many operating heights. Therefore, the most common forklifts we see on the market have a lifting height of 3 meters. . The adjustment height of the truck fork is usually 210mm up and down. The height of the stacker forklift fork is generally about 4.8 meters. The adjustable height of the lift truck can be up to 11 meters long. According to the selection height, cheap forklifts can be divided into low-level forklifts (about 2.5 meters) and high-level forklifts (up to 10 meters). The low safety driving three-way palletizing forklift can be raised by 12 meters. High safety driving three-way palletizing forklift can raise the height by 14.5 meters.

cheap forklifts When the goods are shipped, the goods should be close to the storage shelves, and the height of the goods should not exceed the storage shelves, otherwise the goods are very easy to roll to the actual operating staff and damage the driver. Manipulating items on the plug has a balancing effect. Repair and report problems found immediately, never work with faults or conceal them.

For everyone's safety, you must do what you can when you use it. Don't be too anxious and stack too high, but it will outweigh the gains. This will not bring much benefit to our operators. We must protect our own safety.