What is the lowest cost warehouse lift truck?

  Basic Principles for Assembly and Adjustment of Electric Forklift Parts The assembly process of electric forklift manufacturers is an important link in determining the quality of mechanical maintenance and repair. During assembly, attention should be paid to the following points: The assembled components themselves must meet the specified technical requirements. In order to ensure the maintenance and repair quality of the machinery, any unqualified parts are not allowed to be assembled onto the machinery. For this reason, the components must be carefully inspected before assembly. 2. The correct fitting size must be selected to meet the fitting accuracy requirements. Many parts in maintenance and repair are selected, repaired, or adjusted to meet this requirement, and these methods must be applied correctly. 3. Pay attention to the assembly procedure of electric forklift components. The assembly process is generally carried out based on the principles of first in, then out, first

  1. The requirements of electric forklift manufacturers for the assembly of threaded connections for self loading stacker are: (1) The assembled threads must meet the specified technical requirements. There should be no significant damage to the thread, no bending deformation of the screw, and the fitting quality of the threaded part should be able to be twisted by hand without looseness in a free state; After tightening the thread, the lower plane of its head (or nut) should have good contact with the connected workpiece; (2) After tightening the bolt and nut, the bolt should expose 2-4 threads of the nut, and should not expose too long or too short (this should be noted when replacing the bolt); (3) The components connected by group threads should have uniform contact, good fit, and uniform stress. When tightening for this purpose, it should be done in sequence (such as tightening the nuts of the wheels); (4) The manufacturer of electric forklifts stipulates that locking measure