What if there is a short circuit in the wires of the electric stacker?

I believe everyone has the common sense that the electric stacker is a kind of logistics storage equipment that relies on electric power to walk and operate. Therefore, there are many circuits inside it to control the various systems of the electric stacker and ensure their normal operation. However, in the process of working, the wires will inevitably have problems due to long working time or high working intensity. Common faults include short circuit, open circuit and poor contact. Today, the manufacturer which has forklift for sale will tell you what to do if there is a short circuit in the wires of the electric stacker.

If the circuit switch of the electric stacker is connected to only one electric equipment, it means that the short circuit is in the wires between the switch and the electric equipment. So, how do we determine which wire? At this time, we need to prepare a live wire with a fishtail clip, clamp the fishtail clip on the positive pole of the battery, and then start from one end of the electrical equipment and disconnect the connector of the wire section by section in the direction of the switch. Every time a connector is removed, it is necessary to touch it with a live wire with the fishtail clamp. If there is a fire at one place, the system works normally, and here is a strong spark at another place, but the system does not work, it is proved that the short circuit occurs in the wires between these two places. The manufacturer which has forklift for sale reminds that it needs to be checked and repaired in time.

If the circuit switch of the electric stacker is connected to multiple electrical equipment, there is a short circuit in the wires of one of the electrical equipment. In this case, we can first remove all wire connectors connected by the fuse from the switch. The manufacturer which has forklift for sale reminds everyone that each thread end should be wrapped with adhesive tape to prevent misplacement during reassembly. Next, we need to collide them with fire wire. If the system works normally after collision with one place, it means that the line is normal. If there is a strong spark when it collides with another place, but the system cannot operate normally, it indicates that there is a short circuit in this wires. After the scope is reduced, we need to continue the troubleshooting with the fire wire with fishtail clip.

The above is the troubleshooting method we can take when the circuit of the electric stacker is short. In fact, the electrical system is very important for both diesel and electric forklifts. We can take these methods to troubleshoot problems. If you still don't understand, the manufacturer which has forklift for sale recommends looking for professional personnel to deal with it. Customers  can also consult the forklift manufacturer.