Electric pallet stacker battery usage problem

 

Nowadays, the use of electric pallet stacker can be said to be more and more extensive. In the daily handling work, more emphasis is placed on the control of work efficiency and cost. The use of electric forklifts can be said to effectively resolve these two problems at the same time. Not only that, forklift manufacturers in china are also responsible for environmental protection, because using electricity as power will avoid the generation of pollutants, and the noise is very small, which is very beneficial to people's physical and mental health. However, many people do not know much about the maintenance work of electric forklifts and their related common sense. Then we will popularize the relevant knowledge for you.

When it comes to electric pallet stacker, we can't avoid the related content of batteries. People's maintenance of electric forklift batteries is a shortcoming and even ignored. But what forklift manufacturers in china wants to tell you is that doing a good job in maintenance will prolong the service life of the equipment. It can be compared, the same electric forklift under the same conditions, which one will break first, the one that is carefully maintained or the one that is ignored? The answer is obvious. We must understand that replacing the battery also costs a lot, so why waste this money?

Before charging the electric pallet stacker battery, check the battery temperature to see if it is lower than 30°C and whether the electrolyte level is not lower than the separator. forklift manufacturers in china suggest to check whether the wires can be used normally after that, connect the battery charging socket to the charger charging plug, and then put the charging device in the open position.

During the charging process of the electric pallet stacker battery, the battery temperature should not exceed 45°C. If it exceeds this range, the charging should be stopped, and the battery should be cooled down and then recharged with a lower current to ensure the safety of electricity use. Generally, the charging time is 14-16 hours. After charging, the electrolyte density of the battery will reach 1.27-1.29kg/1.25℃, and the voltage will be about 2.7V. forklift manufacturers in china suggest that everyone should do a good job of charging and maintenance on the day after using the electric forklift.

After the electric pallet stacker battery is charged, disconnect the charging current of the charger, and the "STOP" indicator light is on. At this time, turn off the switch and unplug the charger to avoid accidents and unnecessary losses.